These fountains have been designed for easy DIY assembly with no tools or building skills required. These features are based on various fountain centre pieces within a two tiered base pool. The lower section to the pool is laid down first, the liner (which is supplied as well as pump) is laid into the lower section. The copping is then placed onto the lower section to hold the liner in place – no sealants or cementing required.
The fountains are then assembled in the centre of the pool onto a foundation plate or pump housing (also supplied). The power cable exits the pool surround at the bottom of a pool block through a hole drilled to keep the cable concealed. The maximum depth of water ranges from 18 – 26 cm. All pipework and instructions included.