Premier Range Garden Water Fountains

Installation Instructions

premier fountain range
garden fountains

As can be seen in the pictures, these fountain are supplied with a unique fibreglass base pool that incorporates an edging flange on which the base pool blocks are assembled.

This base pool will be suplied with a powerfull pump that is already sealed into the fiberglass pool. The pump has 10 meters of cable that exits at the side of the pool for easy electrical installation. This system also allows for easy replacement of the pump, should it ever need replacing.

premier base pool
premier pool pump

Installation is as follows:

Lay the fibreglass pool down on the ground. You will need a spirit level to ensure the base is sitting level. Now place the centre fountain into the center of the fiberglass pool. Full instructions are provided showing this step-by-step. The pump is hidden away in the base of the foutain.

All our fountains are pre-levelled at our factory, leaving a minimal amount of levelling on set up.

factory fountain

Depending on how level your ground is, assembly up to this point could take up to a couple of hours.

Whilst you are filling the base pool with water it is time to assemble the edging blocks. The outer edge of the fiberglass is very strong and rigid and has been manufactured by us to a very high standard. Fibreglass is an extremely strong material, in fact it's not only used as ponds to hold thousands of gallons off water but it's also used to build most of the boats cruising up and down our shores, as well as many other uses including flat roofing on houses.

fountain edging blocks

Again, detailed instructions are supplied showing the assembly of the pool blocks. This is simply a matter of placing the edging blocks onto the fibreglass edge of the pool.

We supply a free cement pointing gun and a heavy duty tape. Please see the pictures. This makes pointing your fountain base a clean and simple job. All pointing cement is supplied. Installing the base blocks and the pointing of these blocks can take upto 3 hours of work.

installing your garden fountain
fibreglass fountain pool base

We have spent 6 months designing and testing this product to ensure that every finished fountain not only stands the test of time but also looks as if it had been professionally installed.

This product will be delivered on a week day of your choice by one of our own delivery drivers, ensuring a smooth process from payment to delivery.

We also supply, free of charge, a powerful sump pump. Simply place the sump pump into the pool of water by connecting a simple garden hose to the pump. It will allow you to pump dirty water from your fountain, which can be used for watering the grass or flower borders, allowing you to fill your fountain up with clean water. We recommend this a couple of times a year. Your sump pump will drain the pool down to a depth of approx 5mm.

Customer Installation Gallery

These pictures from a recent installation of one of our premier garden water fountains. The fibreglass was laid straight onto earth with the fountain and pool put straight into the fibreglass base. The customer had chosen to mix and match the fountain and pool to suit his requirements. The stone finish is white limestone.

How to reach us